To Bates stamp PDFs, you pick a prefix and digit count, finalize any redactions, then run the files through Adobe Acrobat Pro or a comparable tool that prints a sequential number onto every page in the batch. Learning how to Bates stamp PDFs is less about the software than about the choices you make before you open it: the prefix, the digit length, the placement, and the order of operations all lock in once you start, and changing them later means restamping thousands of pages.
Decide Your Numbering Scheme Before You Open Anything
Three decisions set up the entire production: your prefix, the number of digits in the sequential counter, and whether you need a suffix. The prefix usually identifies the producing party or the case, something like SMITH or ABC. The counter is the numeric portion that increments page by page. Adobe Acrobat defaults to six digits, so numbers come out as SMITH000001, SMITH000002, and so on, but the setting accepts anywhere from three to fifteen digits.1Adobe. Guide to Bates Numbering in PDF Files A suffix is optional and shows up when a protocol asks for a document category or date in the stamp.
Pick enough digits to cover the whole case, not just today’s batch. If the matter looks like it will run tens of thousands of pages across multiple productions, eight digits gives room. Starting with four digits in a case that eventually produces 50,000 pages means hitting 9999 and reformatting everything after. A sample format: ABC00000001 through ABC00025000 for a 25,000-page production.
Placement is a small decision with a big downstream effect. Most practitioners put the number in the footer, bottom-right, where it stays clear of existing text. Choose a readable font at a size that prints legibly without crowding the content. Black works on most documents; some practitioners pick dark gray or blue so the stamp reads as added rather than original.
Finish Redactions First
Complete and flatten every redaction before you apply a single Bates number. If you stamp first and then pull a page or change a redaction that affects page count, the sequence breaks. Gaps and renumbered pages read, to opposing counsel, like documents may have been withheld.
Some tools let you redact and Bates stamp in either order. That is true at the software level, but the cleaner workflow is to treat the documents as final before stamping. Finish redactions, confirm page counts, run scanned documents through OCR if searchability matters, and then lock in the numbers. Bates stamping is the last step before production.
Stamping in Adobe Acrobat Pro
Acrobat Pro is the most common tool for this. The process:
- Open the PDF in Acrobat Pro and select Edit from the toolbar.
- In the left pane, go to More, then Bates Numbering, then Add.
- In the Bates Numbering dialog, select Add Files. You can load individual PDFs, whole folders, or files already open in Acrobat.
- If you loaded multiple files, use Move Up and Move Down to put them in the sequence you want. Numbering follows this order, so a file out of place throws off every number after it.
- Select Output Options to pick a target folder and set file-naming preferences. Save the stamped versions separately from the originals.
- In the Header and Footer dialog, click into the position box where the number should sit, usually the right footer box. Select Insert Bates Number, then enter digit count, starting number, prefix, and suffix.
- Click OK to stamp the batch.
Acrobat processes the batch sequentially. Load three PDFs of 50, 30, and 20 pages, and the second picks up at 51, the third at 81.2Adobe Acrobat Help. Add Bates Numbering in Acrobat Pro
If You Don’t Have Acrobat
Acrobat Pro is not the only option, and the subscription is not cheap for a solo or small firm. PDF-XChange Editor includes Bates numbering in its paid Windows version and continues numbering across multiple files in a batch. Free browser-based tools like Sejda handle smaller jobs, though you should check whether uploading sensitive litigation files to a cloud service fits your confidentiality obligations. E-discovery platforms such as Relativity build Bates stamping into the production workflow, which is the right fit for large reviews.
Whatever tool you use, test it on a small set first. Confirm the numbers appear where you expect, that prefix and suffix render correctly, and that the sequence does not restart between files.
Native Files You Can’t Stamp
Modern productions include files that cannot carry a traditional Bates stamp. Spreadsheets, databases, and similar files often have to be produced in native format because converting them to PDF destroys functionality the requesting party needs. You cannot print a page number onto a running Excel file the way you would onto a PDF.
The standard answer is Bates naming instead of Bates stamping. Rename the file itself to include the Bates number. Common conventions: prepend the number (SMITH00001000_budget.xlsx), append it (budget_SMITH00001000.xlsx), or replace the filename and record the original in a load file. Each native file gets one Bates number regardless of how many pages or tabs it holds. Work with copies, not originals, and compare hash values between the renamed copy and the original if you need to confirm the content is unchanged.
Check the Output Before You Produce
Spot-check the stamped files before anything leaves your office. Open the first file and confirm the starting number. Jump to the last page of the last file and verify the ending number. Check transitions between files to make sure numbering continued cleanly without gaps or duplicates.
Look at placement on pages that have images, tables, or existing footers that could overlap the stamp. If a number is illegible or sits over existing content, adjust margins or placement and re-run. This is why keeping stamped files separate from originals matters: you can re-stamp without degrading the source.
Confirm every page received a stamp. Some tools skip blank pages by default, which produces gaps that look like missing documents. Disable that setting so every page, including blank separators, carries a number.
Keep a Master Log
Most cases run multiple productions across months or years. A master log of each production’s Bates range prevents the most common numbering disaster: reusing numbers from a prior batch.
At a minimum, record the production date, the Bates range (first and last number), the page count, a short description of the batch, and where the stamped files are stored. If native files went out with the PDFs, note which numbers correspond to native files versus stamped pages. Before stamping the next batch, check the log, find the last number used, and set your starting number to the next integer.
Mistakes That Derail Productions
- Gaps or duplicate numbers. Skipped numbers make opposing counsel suspect documents were withheld. Duplicates make it impossible to cite a specific page. Both force a restamp or an explanatory notice.
- Restarting the sequence inside a production. Every page across the entire set needs a unique number. If the counter restarts at 1 for each document, dozens of pages carry SMITH000001, which defeats the point.
- Inconsistent placement. If some stamps sit bottom-right and others top-left, anyone scanning a deposition exhibit loses time finding the number.
- Stamping originals. Preserve clean, unstamped originals. If a court orders a different format or you find an error, you need clean files to work from.
- Too few digits. Starting with four digits in a case that grows past 9999 pages forces a format change mid-case.
Why the Format Matters Under Rule 34
Bates numbering is not explicitly required by any federal rule, but it is the accepted way to meet the organizational requirements federal courts impose. Federal Rule of Civil Procedure 34(b)(2)(E) requires a party to produce documents either as they are kept in the ordinary course of business or organized and labeled to correspond with the categories in the request.3Legal Information Institute. Federal Rules of Civil Procedure Rule 34 – Producing Documents, Electronically Stored Information, and Tangible Things, or Entering onto Land, for Inspection and Other Purposes Bates numbering is how most litigators meet the organize-and-label option.
The numbers also carry the privilege log. A withheld document has to be identified specifically enough for the court and opposing counsel to evaluate the claim, and Bates ranges are the standard identifier: “SMITH000450–SMITH000455, email chain dated March 12, 2024, attorney-client privilege.” Without them, there is no efficient way to show which documents were pulled from a set of thousands.
For electronically stored information, Rule 34(b)(2)(E) adds that if the requesting party does not specify a format, the producing party must deliver files in the form they are ordinarily maintained or in a reasonably usable form.3Legal Information Institute. Federal Rules of Civil Procedure Rule 34 – Producing Documents, Electronically Stored Information, and Tangible Things, or Entering onto Land, for Inspection and Other Purposes That rule drives the native-file decisions above. Many courts also adopt local rules or enter case management orders that specify exact Bates formats, including required prefixes, digit counts, and whether confidentiality designations have to appear with the stamp. Check your court’s local rules and any protective order in your case before you lock in a format.