A breathalyzer can register a false positive for several reasons that have nothing to do with how much you drank: alcohol lingering in your mouth from mouthwash, reflux, or dental work; medical conditions like diabetes or auto-brewery syndrome; an elevated body temperature; certain medications and workplace chemical fumes; a device that is out of calibration or confused by radio interference; and the fixed conversion ratio the technology relies on, which doesn’t fit every body. Most of these causes are common enough that officers encounter them regularly, and most drivers have no idea they exist.
Mouth Alcohol
In practice, this is where most falsely inflated readings come from. A breathalyzer is built to measure alcohol vapor from deep in your lungs, where the concentration reflects what’s actually in your bloodstream. When alcohol is sitting in your mouth or throat instead, the device can’t tell the difference. It reads that concentrated mouth alcohol as if it had come from your lungs, and the number it spits out can be dramatically higher than your true BAC.
Several everyday situations put alcohol directly in the mouth without any new drinking:
- GERD and acid reflux push stomach contents, including any alcohol from earlier drinks, back up into the throat and mouth.
- A test taken too soon after a drink captures residual alcohol in the mouth that hasn’t yet been absorbed into the bloodstream.
- Many antiseptic mouthwashes contain between 14% and 27% alcohol by volume, and products like Listerine Cool Mint sit around 21.6%, stronger than most wines. Rinsing shortly before a test can produce a reading that looks like heavy drinking.1Listerine. Alcohol vs Alcohol-Free Mouthwash Which Is Best for You
- Dentures, bridges, caps, and deep cavities can trap small pockets of alcohol from food or drink, releasing it slowly during breathing.
- A burp or vomiting episode brings stomach gases, including alcohol vapor, straight into the mouth. A single belch moments before blowing can spike the result.
To guard against this, testing protocols in most jurisdictions require the officer to observe you continuously for roughly twenty minutes before administering the test. During that window, you aren’t supposed to eat, drink, vomit, belch, or put anything in your mouth, and if any of that happens the clock is supposed to restart. Officers sometimes cut this period short or get distracted during it, which is one of the most common procedural errors in DUI cases.
Medical Conditions That Can Mimic Alcohol
Diabetes and Low-Carb Diets
When your body burns fat instead of glucose, it produces ketones. One of them, acetone, is exhaled through the lungs. People with diabetes who develop ketoacidosis generate high levels of acetone, and people on strict ketogenic diets produce it as well, usually at lower levels. Some breathalyzer technologies can confuse acetone with ethanol because the two molecules have overlapping chemical signatures. Newer federal model specifications for evidential breath testing devices include a specific test for acetone interference,2Federal Register. Highway Safety Programs Conforming Products List of Evidential Breath Alcohol Measurement Devices but older machines and handheld roadside screeners may not screen it out.
Auto-Brewery Syndrome
Auto-brewery syndrome is rare but real. An overgrowth of yeast or certain bacteria in the gut ferments carbohydrates into actual ethanol inside the digestive system, meaning a person can register a measurable BAC on both breath and blood tests without having consumed any alcohol.3National Library of Medicine. The Auto-Brewery Syndrome: A Perfect Metabolic Storm It has been raised as a defense in DUI cases, though proving it requires medical documentation and testing.
Fever and Elevated Body Temperature
Breathalyzers are calibrated assuming a normal body temperature of 98.6°F. A fever, intense exercise, or an extended stretch in a hot car raises your core temperature, which increases the rate at which alcohol evaporates from your blood into your breath. Research has estimated that each degree Celsius above normal can inflate a reading by roughly 6% to 9%. Someone running a moderate fever could see a legitimate 0.07% bumped to an over-the-limit 0.08% without any additional alcohol in their system.
Medications and Chemical Exposure
Some medications contain alcohol or compounds the device may misread. Asthma inhalers use propellants that certain machines interpret as alcohol, especially if used shortly before the test. Many liquid cold and cough medicines contain alcohol as a solvent, sometimes at concentrations higher than beer, and a dose taken within the past half hour can show up on a breath test.
Environmental exposure creates a similar problem. Fumes from paint, lacquer, varnish, gasoline, or cleaning solvents introduce volatile organic compounds into your lungs, and depending on the sensor these may be misidentified as ethanol. Auto body workers, painters, factory workers, and cleaners can carry enough residual solvent vapor to affect a reading taken shortly after a shift. Even heavy use of alcohol-based hand sanitizer, followed by touching your face or the mouthpiece, has been flagged as a potential source of interference.
The 2100:1 Ratio Isn’t True for Everyone
Every breathalyzer converts the alcohol detected in your breath into an estimated blood alcohol concentration using a fixed conversion factor called the blood-to-breath partition ratio, set at 2100:1. The ratio assumes exactly 2,100 parts of alcohol in your blood for every 1 part in your breath. But studies show the real ratio ranges from about 1500:1 to 3000:1 depending on age, sex, genetics, and where you are in metabolizing a drink. If your natural ratio runs below 2100:1, the machine overestimates your BAC. Someone with a 1500:1 ratio could show a reading roughly 40% higher than their true blood alcohol level. This isn’t a malfunction or an officer’s mistake. It’s a limitation built into how the technology works.
Device Problems and Operator Mistakes
Calibration and Maintenance
Breathalyzer sensors drift. Components age, and environmental conditions take a toll on accuracy. Regular calibration against a known alcohol standard is what keeps a device reliable, and most jurisdictions and manufacturers require calibration at least annually, with many agencies doing it more often. If a device hasn’t been properly calibrated, or maintenance records show gaps, any result it produces is suspect. Defense attorneys routinely request calibration logs, and missing or incomplete records can be enough to get a breath test excluded from evidence.
Sensor Technology
Not all breathalyzers work the same way. Fuel cell sensors are generally more specific to ethanol and less likely to be fooled by acetone, but they can degrade over time from contaminants like cigarette smoke. Infrared devices analyze how breath absorbs specific wavelengths of light, but acetone and other chemicals absorb at overlapping wavelengths, which can produce false readings if the device’s filters aren’t sophisticated enough to distinguish them. Handheld preliminary breath testers used at the roadside are typically less sophisticated than the evidential devices used at the station.
Radio Frequency Interference
Breathalyzers are electronic instruments, and like any electronics they can be affected by radio frequency interference from nearby transmitters. Police radios, dispatch systems, cell phones, and radar guns all emit energy that can disturb a breathalyzer’s circuitry. Modern devices are better shielded than older models, but the problem hasn’t been entirely eliminated, particularly in patrol cars running multiple active electronic systems.
Operator Error
Even a perfectly calibrated machine produces unreliable results if the officer makes mistakes. The common ones include failing to complete the full observation period, not restarting the clock after a burp or something going in the subject’s mouth, giving unclear instructions on how to provide the sample, and running the test while the subject is still in a vehicle filled with chemical fumes. These failures don’t mean the device malfunctioned, but they undermine the reliability of the number just the same.
Rising BAC Between the Stop and the Test
Your BAC isn’t a fixed number. After your last drink, alcohol continues to absorb from your stomach and small intestine into your bloodstream, and that absorption phase can last 30 minutes to two hours or longer depending on what you ate, how fast you drank, and your individual metabolism. If you were pulled over during the absorption phase and tested at the station 30 or 45 minutes later, your BAC at the time of testing could be meaningfully higher than it was when you were actually driving. A reading of 0.09% at the station might have been 0.06% behind the wheel. This isn’t technically a false positive, since the device is accurately measuring your current BAC, but it can make you appear more intoxicated than you were at the moment the stop was triggered.
What to Do If You Think the Reading Is Wrong
Every state has an implied consent law. By driving on public roads, you’ve already agreed to submit to chemical testing if lawfully arrested for suspected DUI. Refusing triggers automatic penalties, typically a license suspension that applies whether or not you’re ever convicted. In most states that suspension is handled administratively by the motor vehicle agency, separate from the criminal case, and can be longer than the suspension that follows a DUI conviction itself.
If you take the breath test and believe the result is wrong, most states give you the right to request an independent blood test at your own expense. A lab blood draw measures BAC directly, without the assumptions and conversion factors that make breath testing vulnerable to the problems described above. Request it promptly, because your BAC will keep changing as your body metabolizes alcohol.
In a DUI case, breathalyzer evidence can be challenged on several grounds: missing or incomplete calibration records, failure to follow the observation period, medical conditions that produce interfering substances, improper device maintenance, and environmental contamination at the testing location. Courts have recognized that breathalyzer results are not infallible, and the strongest challenges tend to combine a documented procedural error with an alternative explanation for the elevated reading, such as diagnosed GERD or a confirmed diabetic condition.