What Does “Sample Not Accepted” Mean on Intoxalock?

If your Intoxalock is showing “Sample Not Accepted,” the device didn’t detect alcohol. It couldn’t read your breath sample at all. The most common causes are blowing too hard or too softly, breaking the blow-inhale-blow pattern, or having something in your mouth (food residue, mouthwash, medication) that interfered with the reading. A single rejected sample is a prompt to try again, not a violation.

What the Message Actually Means

Intoxalock devices need a breath sample that meets specific volume and flow thresholds. Federal model specifications require interlock devices to process a sample of about 1.2 liters delivered at a consistent flow rate.1Federal Register. Model Specifications for Breath Alcohol Ignition Interlock Devices If your breath doesn’t hit those numbers, the device can’t analyze it and rejects the sample.

That is different from a “fail” reading. A fail means the device successfully processed your breath and detected alcohol above the set point, typically 0.02 g/dL. “Sample Not Accepted” means the device never got a usable reading in the first place. One rejected sample is essentially the device telling you to try again. String enough of them together in a short window, though, and the pattern can be interpreted as an attempt to avoid providing a valid reading.

Fix It Right Now

If the message is on your screen as you’re reading this, work through these steps in order:

  • Rinse your mouth with plain water to clear any residue.
  • Wait 10 to 15 minutes. Mouth alcohol from food, mouthwash, or medication dissipates quickly, but the sensor picks up even fading traces.
  • Reset your technique before you blow again. Keep your lips sealed around the mouthpiece and plan to stay there through the full sequence.
  • Try again. If the sample is accepted and your reading is clean, you’re clear to drive.

Most people who clear a repeat rejection do it with those four steps. If the message keeps coming back, the problem is likely either your blow pattern or something lingering in your mouth or the cabin air.

The Correct Blow Pattern

Intoxalock uses a blow-inhale-blow pattern rather than the hum-and-blow technique some other interlock providers require. The whole sequence is one continuous motion without removing your mouth from the mouthpiece:2Intoxalock. Ignition Interlock Blow Patterns Explained

  • Exhale steadily into the mouthpiece for one to two seconds.
  • Breathe in through the device for one to two seconds.
  • Exhale again until the device vibrates, usually about four seconds.

The harder you blow on that final exhale, the shorter it needs to last. Most repeated rejections come from pausing between steps, pulling away from the mouthpiece mid-sequence, or not sustaining that final blow long enough. Focus on steady pressure rather than blowing as hard as you can, and keep your lips sealed the entire time.2Intoxalock. Ignition Interlock Blow Patterns Explained

People with reduced lung capacity from asthma, COPD, or other respiratory conditions sometimes struggle to meet the volume requirement. If that applies to you and the problem is recurring, bring it up at your next calibration appointment so a technician can check device calibration and confirm your technique.

Substances That Interfere With a Reading

Even with perfect technique, everyday items can throw off the sample. The device measures alcohol molecules in your breath, and plenty of products contain trace ethanol that has nothing to do with drinking:

  • Mouthwash and breath sprays, many of which contain ethanol at concentrations high enough to register. Alcohol-free versions are a safer choice.
  • Fermented foods and drinks like bread, pastries, ripe fruit, and kombucha, which can produce trace alcohol as they break down in your mouth.
  • Liquid cough syrups, cold medicines, and asthma inhaler propellants, which often use alcohol as a solvent or preservative.
  • Alcohol-based hand sanitizer used shortly before a test, where lingering fumes can affect the reading.
  • Perfume or cologne sprayed inside the car, which can leave residual fumes in the confined cabin.

Intoxalock confirms all of these can trigger a positive or unreadable result.3Intoxalock. What Beyond Alcoholic Drinks Can Set Off an Ignition Interlock Rinsing with water and waiting 10 to 15 minutes before testing again clears most of them. Building that buffer into your routine before you get behind the wheel keeps most false readings from happening at all.

When Rejections Turn Into a Lockout

Too many failed or rejected samples in a short period will trigger a lockout. Intoxalock devices have two kinds, and they call for very different responses.4Intoxalock. Top 5 Causes of an IID Lockout

Temporary Lockout

A temporary lockout kicks in when the device detects a prohibited condition, like a high reading or too many rejected samples. The screen shows a countdown of several minutes. You can’t start the vehicle during that window, but once the timer expires, you get another chance to provide a clean sample. A single temporary lockout usually doesn’t generate a standalone violation report.

Service Lockout

A service lockout is the serious version. The countdown is measured in days rather than minutes. If you don’t resolve the issue before it hits zero, the device needs professional servicing or replacement. Check the Intoxalock mobile app to see whether your state allows a remote lockout reset. If it doesn’t, call Intoxalock customer support at 844-535-0260 or book an appointment at a service center.4Intoxalock. Top 5 Causes of an IID Lockout Expect to pay around $75 for the reset, though fees vary by state.

When the Message Won’t Go Away

If “Sample Not Accepted” keeps appearing despite clean technique and no contaminants, the device itself may be the problem. Sensor drift, wiring issues, and environmental damage from extreme heat or cold can all cause persistent rejection of valid samples. Contact Intoxalock’s 24/7 customer support and schedule a service appointment.

Document everything while you’re waiting: the date, the time, and how many samples got rejected. If the pattern eventually surfaces as a reported violation, that documentation is your evidence that the problem was mechanical, not behavioral.

The calibration appointment is your best protection against false violations. A technician can identify sensor degradation, confirm the device is reading correctly, and flag anomalies in your log. Skipping or delaying calibration doesn’t hide anything, because the missed appointment itself becomes a separate violation, and problems with the device go undiagnosed longer in the meantime.5Intoxalock. Ignition Interlock Device Calibration Information

How the Device Reports What It Sees

Every event on your Intoxalock gets recorded: every start attempt, every breath test result, every retest, and any sign of tampering or circumvention.1Federal Register. Model Specifications for Breath Alcohol Ignition Interlock Devices Some states use real-time reporting, where Intoxalock’s compliance team reviews and flags violations as they happen. Others rely on data downloads during calibration appointments, which occur every 30 to 120 days depending on state rules.6Intoxalock. Ignition Interlock Violations and Penalties – What You Need to Know

Compliance officers look at patterns, not isolated events. A single rejected sample surrounded by weeks of clean tests reads very differently from a cluster of rejections on a Friday night. That is why resolving a rejection the right way (rinse, wait, reblow with correct technique) matters even when nothing legal happens that day. Your log is cumulative, and clean entries around a rejection are the context that keeps a technical glitch from looking like something else.